Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


marmel

1924 posts

Uber Geek

ID Verified
Trusted

#86188 2-Jul-2011 18:04

I know these threads pop up from time to time but technology moves so fast and prices fluctuate some of the older posts may not be so relevant now.

I have a Silverstone LC-17 HTPC case.

Looking to spend about $500 on a Motherboard, CPU and RAM upgrade.

I am currently using an old Asus A85NX with an Athlon running at 1.8ghz.

I'm not really up to the play with the current state of play between intel - AMD but I figure I could get a reasonable quad core, or possibly 6 core AMD set up for around $500.

My HTPC will be used for normal HD distribution etc but also for editing HD video and editing images from my DSLR, some RAW pics can top 24mb.

I already have an ATI 7650 1GB video card so don't need an upgrade there, just what is listed above.

I would appreciate any recommendations as to what to look out for and perhaps what set up is going to suit me best, intel vs AMD etc.

Cheers.

I also have some spare parts from my HTPC which I will give away once I have done the upgrade including an Audigy 2 PCI card, WINTV PCI card, ATI 256MB video card with HDMI out etc. Let me know if you are keen.        

                

Create new topic
RealityClash
192 posts

Master Geek


  #488667 2-Jul-2011 19:04
Send private message

- Gigabyte GA-P67X-UD3
- Intel Core i5 2400 3.1GHz Quad core
- Kingston 4GB HyperX DDR3-1600

Total $617.60 from ComputerLounge.co.nz

I realise thats a fair bit over what you were wanting to pay but this should have better performance then most if not all current AMD quad core CPU's.

Otherwise you may want to wait for AMD's Bulldozer CPU's. (Someone else should know when theyre supposed to be getting released) :)

Any chance you could post me link me to that WINTV PCI card? :)



marmel

1924 posts

Uber Geek

ID Verified
Trusted

  #488670 2-Jul-2011 19:32

RealityClash: - Gigabyte GA-P67X-UD3
- Intel Core i5 2400 3.1GHz Quad core
- Kingston 4GB HyperX DDR3-1600

Total $617.60 from ComputerLounge.co.nz

I realise thats a fair bit over what you were wanting to pay but this should have better performance then most if not all current AMD quad core CPU's.

Otherwise you may want to wait for AMD's Bulldozer CPU's. (Someone else should know when theyre supposed to be getting released) :)

Any chance you could post me link me to that WINTV PCI card? :)


The WinTV is pretty old school, analog tuners only so it would only be of use for the next year until the switch off. It appears to have twin tuners and comes with an extra mini card which takes up another expansion bay in the back of your PC for video in. Has RCA and S-Video in and out as well as the standard aerial plug in and out. 

timmmay
20575 posts

Uber Geek

Trusted
Lifetime subscriber

  #488784 3-Jul-2011 12:44
Send private message

Intel = fast, and quite good value
AMD = good value, and fast enough for most people

Given the video editing and RAW processing i'd recommend an Intel i5 or i7.



michaelt
425 posts

Ultimate Geek


  #488799 3-Jul-2011 13:58
Send private message

I'd also suggest a Sandy Bridge system, probably with that same i5-2400 CPU.

That Gigabyte GA-P67X-UD3 motherboard is overkill for your needs though.

I'd go with a cheap H61 (or maybe H67) based board and cheaper DDR3-1333 RAM. You could probably go well under the $500 mark if you look around.

Also, I think you have your graphics card model wrong. I've never heard of an ATI 7650 1GB.

marmel

1924 posts

Uber Geek

ID Verified
Trusted

  #488802 3-Jul-2011 14:05

The video card is a 7560, got the numbers the wrong way round.

Thanks for the suggestions, I have pretty much decided on an i5 2400, now just need to decide on how much to spend on the mobo/ram.

michaelt
425 posts

Ultimate Geek


  #488805 3-Jul-2011 14:49
Send private message

I think you've got those numbers wrong again.

It'll either be a 5670, 5760, 6570 or 6750.

Just so you know, the cheaper Sandy Bridge chipsets (H61 and H67) only support DDR3-1333 RAM. Anything faster will run at 1333MHz. Not worth spending more unless you get a better (P67 or Z68) motherboard.

I'd recommend having a look at the Intel DH67BL motherboard. It's the cheapest H67 motherboard and silentpcreview indicates it has a very low idle power consumption so would be great for an always-on HTPC.

You could probably save another $50 by going for a dirt-cheap H61 motherboard, which might be just as suitable for you.

The Intel DZ68DB is a good option if you want to overclock a bit or use faster RAM.

marmel

1924 posts

Uber Geek

ID Verified
Trusted

  #488809 3-Jul-2011 15:16

6570, third time lucky :-)

Create new topic





News and reviews »

Air New Zealand Starts AI adoption with OpenAI
Posted 24-Jul-2025 16:00


eero Pro 7 Review
Posted 23-Jul-2025 12:07


BeeStation Plus Review
Posted 21-Jul-2025 14:21


eero Unveils New Wi-Fi 7 Products in New Zealand
Posted 21-Jul-2025 00:01


WiZ Introduces HDMI Sync Box and other Light Devices
Posted 20-Jul-2025 17:32


RedShield Enhances DDoS and Bot Attack Protection
Posted 20-Jul-2025 17:26


Seagate Ships 30TB Drives
Posted 17-Jul-2025 11:24


Oclean AirPump A10 Water Flosser Review
Posted 13-Jul-2025 11:05


Samsung Galaxy Z Fold7: Raising the Bar for Smartphones
Posted 10-Jul-2025 02:01


Samsung Galaxy Z Flip7 Brings New Edge-To-Edge FlexWindow
Posted 10-Jul-2025 02:01


Epson Launches New AM-C550Z WorkForce Enterprise printer
Posted 9-Jul-2025 18:22


Samsung Releases Smart Monitor M9
Posted 9-Jul-2025 17:46


Nearly Half of Older Kiwis Still Write their Passwords on Paper
Posted 9-Jul-2025 08:42


D-Link 4G+ Cat6 Wi-Fi 6 DWR-933M Mobile Hotspot Review
Posted 1-Jul-2025 11:34


Oppo A5 Series Launches With New Levels of Durability
Posted 30-Jun-2025 10:15









Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.