Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


Filter this topic showing only the reply marked as answer View this topic in a long page with up to 500 replies per page Create new topic
1 | 2 | 3 
ubergeeknz
3344 posts

Uber Geek

Trusted
Vocus

  #1769478 24-Apr-2017 07:33
Send private message

Unlimited VDSL (or Fiber, when it's available) with homeline is only $84.95 with Slingshot... if you're not in contract you may as well switch and benefit from the extra speed.  Note most VDSL modems will work with ADSL anyway.




tommyboy

27 posts

Geek


  #1769997 24-Apr-2017 20:08
Send private message

michaelmurfy:

I don't need Gigabit - just saying ;) It is worth going to VDSL. I would talk to your partner about going to Skinny Direct on her mobile - $30/mo for unlimited calls, texts and 3gb data then you can go for something like Skinny for home broadband. This way, you're getting the best speeds you can possibly get and a cheap router.



Oh yea i was going to ask you. Since I bought the asus router from the u.s. I would assume that i need a power transformer to convert 220v to 110v otherwise i might blow the router right? I do own a few power transformers.

kiwigander
231 posts

Master Geek


  #1770362 25-Apr-2017 21:50
Send private message

1. For your ASUS router, check the output specification of the power supply, then pick up a power supply from Jaycar. Much cheaper than a decent 230-115 V stepdown transformer.

2. Would a D-Link DSL-502T fulfil your ADSL2+ requirements? I've got one in the cupboard and no prospect of using it.



hio77
12999 posts

Uber Geek

ID Verified
Trusted
Lizard Networks

  #1770366 25-Apr-2017 21:58
Send private message

kiwigander: 1. For your ASUS router, check the output specification of the power supply, then pick up a power supply from Jaycar. Much cheaper than a decent 230-115 V stepdown transformer.

 

 

I'm yet to see a modem that does not take in a low DC voltage i'd expect no stepdown is required just the correct input.

 

 

 

kiwigander:

2. Would a D-Link DSL-502T fulfil your ADSL2+ requirements? I've got one in the cupboard and no prospect of using it.

 

That modem has major issues with syncing on ADSL2+ profiles, normally resulting in trash speed.





#include <std_disclaimer>

 

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.

 

 


kiwigander
231 posts

Master Geek


  #1770372 25-Apr-2017 22:27
Send private message


kiwigander: 1. For your ASUS router, check the output specification of the power supply, then pick up a power supply from Jaycar. Much cheaper than a decent 230-115 V stepdown transformer.


I'm yet to see a modem that does not take in a low DC voltage i'd expect no stepdown is required just the correct input.


They all take low voltage DC, but if you try to use a USA-sourced power supply you may find that you fry your modem. Universal voltage (100-250 VAC input) power supplies are not universal in North America. Some of their power supplies will not cope with 230 V mains and will end up putting too many volts into the modem.

If the North American power supply says 100-250 VAC input, fine. But if it says 100-125 VAC, do NOT try to use it.



sbiddle
30853 posts

Uber Geek

Retired Mod
Trusted
Biddle Corp
Lifetime subscriber

  #1770397 26-Apr-2017 07:17
Send private message

kiwigander:

 


kiwigander: 1. For your ASUS router, check the output specification of the power supply, then pick up a power supply from Jaycar. Much cheaper than a decent 230-115 V stepdown transformer.


I'm yet to see a modem that does not take in a low DC voltage i'd expect no stepdown is required just the correct input.

 



They all take low voltage DC, but if you try to use a USA-sourced power supply you may find that you fry your modem. Universal voltage (100-250 VAC input) power supplies are not universal in North America. Some of their power supplies will not cope with 230 V mains and will end up putting too many volts into the modem.

If the North American power supply says 100-250 VAC input, fine. But if it says 100-125 VAC, do NOT try to use it.


 

Universal power supplies now seem to be the norm on most devices such as routers.

 

Running a product permanently with a travel adapter is however not recommended. By law these are for temporary use, not permanent. It's also illegal to sell a product in NZ that does not have a AU/NZ power socket which still catches people out on Trademe. Lots of parallel importers just use to sell products with travel adapters.

 

 


tommyboy

27 posts

Geek


  #1771138 27-Apr-2017 10:48
Send private message

sbiddle:

 

kiwigander:

 


kiwigander: 1. For your ASUS router, check the output specification of the power supply, then pick up a power supply from Jaycar. Much cheaper than a decent 230-115 V stepdown transformer.


I'm yet to see a modem that does not take in a low DC voltage i'd expect no stepdown is required just the correct input.

 



They all take low voltage DC, but if you try to use a USA-sourced power supply you may find that you fry your modem. Universal voltage (100-250 VAC input) power supplies are not universal in North America. Some of their power supplies will not cope with 230 V mains and will end up putting too many volts into the modem.

If the North American power supply says 100-250 VAC input, fine. But if it says 100-125 VAC, do NOT try to use it.


 

Universal power supplies now seem to be the norm on most devices such as routers.

 

Running a product permanently with a travel adapter is however not recommended. By law these are for temporary use, not permanent. It's also illegal to sell a product in NZ that does not have a AU/NZ power socket which still catches people out on Trademe. Lots of parallel importers just use to sell products with travel adapters.

 

 

 

 

 

 

Yeah i've just called Asus and they have confirmed the one that I've ordered through amazon does come with a universal power supply. I guess I just need to purchase a adaptor to make the pins fit into my wall jack.


1 | 2 | 3 
Filter this topic showing only the reply marked as answer View this topic in a long page with up to 500 replies per page Create new topic





News and reviews »

Air New Zealand Starts AI adoption with OpenAI
Posted 24-Jul-2025 16:00


eero Pro 7 Review
Posted 23-Jul-2025 12:07


BeeStation Plus Review
Posted 21-Jul-2025 14:21


eero Unveils New Wi-Fi 7 Products in New Zealand
Posted 21-Jul-2025 00:01


WiZ Introduces HDMI Sync Box and other Light Devices
Posted 20-Jul-2025 17:32


RedShield Enhances DDoS and Bot Attack Protection
Posted 20-Jul-2025 17:26


Seagate Ships 30TB Drives
Posted 17-Jul-2025 11:24


Oclean AirPump A10 Water Flosser Review
Posted 13-Jul-2025 11:05


Samsung Galaxy Z Fold7: Raising the Bar for Smartphones
Posted 10-Jul-2025 02:01


Samsung Galaxy Z Flip7 Brings New Edge-To-Edge FlexWindow
Posted 10-Jul-2025 02:01


Epson Launches New AM-C550Z WorkForce Enterprise printer
Posted 9-Jul-2025 18:22


Samsung Releases Smart Monitor M9
Posted 9-Jul-2025 17:46


Nearly Half of Older Kiwis Still Write their Passwords on Paper
Posted 9-Jul-2025 08:42


D-Link 4G+ Cat6 Wi-Fi 6 DWR-933M Mobile Hotspot Review
Posted 1-Jul-2025 11:34


Oppo A5 Series Launches With New Levels of Durability
Posted 30-Jun-2025 10:15









Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.