12v system around the home - anybody done it?

Forums › Gadgets, robotics, home automation, electronics (including wearables) › 12v system around the home - anybody done it?

1 | 2

datahawk

251 posts

Ultimate Geek

Lifetime subscriber

#1947086 26-Jan-2018 11:29

Seems impossible to find adapters for RG6 to DC so I just used these on a short length of RG6 and some heat shrink....

https://www.ebay.com/itm/10Pcs-F-Connector-Screw-On-Type-RG6-Satellite-TV-Antenna-Coax-Cable-Twist-on/401481887719?epid=2184656028&hash=item5d7a2f6fe7:g:jsgAAOSwk-9ZgEyr

https://www.ebay.com/itm/1-pair-2-1mm-Male-Female-DC-Power-Connector-Jack-Adapter-for-Cam-LED-CCTV-BK53/253381121951?hash=item3afeb1179f:g:DtoAAOSwYNxaYZc9

phrozenpenguin

840 posts

Ultimate Geek

#1947305 26-Jan-2018 20:09

Thanks all, some interesting ideas. In my situation I (at least to start with) don't have to run things too far, so don't see the point in starting high and then still needing an adaptor to reduce the voltage. Also seen some compact DIN mountable PSU's which might fit my needs.

jnimmo

1097 posts

Uber Geek

#1947330 26-Jan-2018 20:44

Plenty of DIN PSUs on Aliexpress etc

Can highly recommend DIN fuse terminal block connectors too, just pop it out if you need to reset or isolate a device

MikeAqua

7782 posts

Uber Geek

#1948107 29-Jan-2018 12:44

Voltage drop is a PITA with DC cabling.

There are a bunch of calculators online that choose cables based on acceptable voltage drop, distance and amps.

You generally limit voltage drop to 3% for electronic devices.

Mike

rokdust

4 posts

Wannabe Geek

#1959279 16-Feb-2018 17:52

Hi,

Also interested in this topic.

SumnerBoy:

Very interested in this as well (but don't have anything to share sorry).

A mate is almost at pre-wire for his new house and asked me about wiring/lighting options. I am meeting his sparky next week to discuss. I like the idea of running low voltage wiring around the house to all lights and light switches. Then run them all back to a central location.

Just curious as to if this meeting took place and what the outcome was?

SumnerBoy

2074 posts

Uber Geek

ID Verified

Lifetime subscriber

#1959330 16-Feb-2018 20:35

The sparky agreed about the control wiring but not the loads. Voltage drop over long runs the issue.

Mistenfuru

198 posts

Master Geek

#1959331 16-Feb-2018 20:38

I run a large amount of devices in my property on 48V PoE, have so far had no troubles at all and allows me to just run Cat6 wherever I need power.

1 | 2