[WXC/VFX] Linksys AG310 n00b question

Forums › One New Zealand (including Vodafone, WxC, Farmside) › [WXC/VFX] Linksys AG310 n00b question

xacimo

1 post

Wannabe Geek

#26094 11-Sep-2008 20:00

Hi,
I am thinking of signing up to World Exchange DSL and VOIP, and sorting out the hardware I will need.
I have a simple question about the AG310. It only has one standard telephone jack, but we have multiple phones to connect. The first thing that occurred to me was to use a simple generic adaptor so I can plug in multiple devices to the single port. Will this work?? If not, what is the best alternative? I am on a tight budget, so I am not keen on purchasing any more costly adaptors.
Thanks

snnet

1410 posts

Uber Geek

#163847 11-Sep-2008 20:07

Not entirely sure but using an adapter SHOULD work at least if it's not too many phones. The voltage will be fine as it will be connected in parallel but as for current I have no idea - best bet is to just try and see how many work on it at the same time?

coffeebaron

6234 posts

Uber Geek

Trusted

Lifetime subscriber

#163860 11-Sep-2008 21:11

There have been a lot of specials lately of cordless phone deals - 2 or 3 packs. So you plug the base into the AG310, and place a couple of cradles a round the house. Just avoid 2.4GHz models.
http://www.dse.co.nz/cgi-bin/dse.storefront/en/product/F7694

Rural IT and Broadband support.

Broadband troubleshooting and master filter installs.
Starlink installer - one month free: https://www.starlink.com/?referral=RC-32845-88860-71
Wi-Fi and networking
Cel-Fi supply and installer - boost your mobile phone coverage legally

Need help in Auckland, Waikato or BoP? Click my email button, or email me direct: [my user name] at geekzonemail dot com

natedog

120 posts

Master Geek

#164343 14-Sep-2008 15:08

I have two phones working off my AG310, however only one (a corded phone) is plugged into my modem, with a cordless phone plugged into an "extension" plug from the corded phone. Works great!