![]() ![]() ![]() |
|
Yup, I'm using Sutton drills as well now, the garbage ones were just ones I had lying around which I thought I'd try before yet another run to Bunnings.
I would have chosen my Ryobi reciprocating saw but it is now replaced by the Stihl mini battery chainsaw.
Those mini Stihls are awesome.
I don't have one, but it's on the list. Used one a few weeks ago chopping up a fallen tree (along with a petrol Stihl and another battery Stihl chainsaw). The mini was great at removing the small annoying bits.
I get the most use out of my shindawa power head. A 1.5m Hedge trimmer, and a 2m pruning saw. I also have the weed whacker head.
Might be a dirty petrol, but until they allow me to replace the power head and keep the attachments, I don't think it's going anywhere.
Previously known as psycik
Home Assistant: Gigabyte AMD A8 Brix, Home Assistant with Aeotech ZWave Controller, Raspberry PI, Wemos D1 Mini, Zwave, Shelly Humidity and Temperature sensors
Media:Chromecast v2, ATV4 4k, ATV4, HDHomeRun Dual
Server Host Plex Server 3x3TB, 4x4TB using MergerFS, Samsung 850 evo 512 GB SSD, Proxmox Server with 1xW10, 2xUbuntu 22.04 LTS, Backblaze Backups, usenetprime.com fastmail.com Sharesies Trakt.TV Sharesight
tehgerbil:
What features do you appreciate in your headlamp please while running?
E.g. battery type, wide/narrow beam and headband design to avoid slippage while running. Thanks :)
I have 2 that i use for different purposes.
Led Lenser NEO6R that I use for local road running in the mornings on dimly lit roads where I don't need too much light. Its light, has the battery at the back so it balances the weight well, has a small flashing red light at the back on the battery pack to be better seen from behind and at 200 lumens has just the right amount of light for this purpose
Then I have the Fenix HM65R-T for serious off-road stuff. While the battery is at the front of this one, the light weight (magnesium alloy) combined with the wide band with boa system to tighten it means it doesn't bounce too much. It still does but its better than most comparable torches. Plenty bright (up to 1,400 lumens) with many different settings so you can dial in just the right amount of brightness combined with two independently controlled light sources. There's a bright white spot LED and a yellowish flood LED so you can have a wide beam as well as a long throw beam down the trails.
Probably my Leatherman Skeletool
Senecio:
Led Lenser NEO6R that I use for local road running in the mornings on dimly lit roads where I don't need too much light. Its light, has the battery at the back so it balances the weight well, has a small flashing red light at the back on the battery pack to be better seen from behind and at 200 lumens has just the right amount of light for this purpose
Then I have the Fenix HM65R-T for serious off-road stuff. While the battery is at the front of this one, the light weight (magnesium alloy) combined with the wide band with boa system to tighten it means it doesn't bounce too much. It still does but its better than most comparable torches. Plenty bright (up to 1,400 lumens) with many different settings so you can dial in just the right amount of brightness combined with two independently controlled light sources. There's a bright white spot LED and a yellowish flood LED so you can have a wide beam as well as a long throw beam down the trails.
The Fenix is a beast! I have that exact model as well and it works well for late nights in the bush and being able to swap out the 18650 batteries while on the go is a great feature. For road running, I will either use a Black Diamond Spot with rechargeable AAA batteries or my Noxgear vest with chest light attachment. The need to be visible on the road at night cannot be overstated enough.
My analog calipers. No fuzzy logic, AI or data lake can replace it.
- NET: FTTH, OPNsense, 10G backbone, GWN APs, ipPBX
- SRV: 12 RU HA server cluster, 0.1 PB storage on premise
- IoT: thread, zigbee, tasmota, BidCoS, LoRa, WX suite, IR
- 3D: two 3D printers, 3D scanner, CNC router, laser cutter
Tool box.
Holds a collection of my most frequently used tools.
Gordy
My first ever AM radio network connection was with a 1MHz AM crystal(OA91) radio receiver.
Gordy7:
Tool box.
Holds a collection of my most frequently used tools.
Yeah, I must get myself another 2-3 tool boxes.
1st one is loaded up with my Lathe tools
2nd one will be for milling tools
3rd one will be for general tools
And if I can find and ship home a wooden toolmakers tool box while I am in the USA that will be added too :-) but likely hold a lot of my electronics tools
Speaking of tool boxes, these things are absolutely invaluable when working outdoors, you just throw the specific bits you need in them and you've got everything you need, and no more, in one place, all easy to carry around.
|
![]() ![]() ![]() |