Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


markoneswift

35 posts

Geek


#153521 29-Sep-2014 21:19
Send private message

Hi all,

I'm new here and this is my first post. I've been reading the forums for some time so I'm hopeful I'll get good advice on here :-)

I've just moved into a new house and I've got a problem with the phone jacks. All the jacks ( four in total ) are dead and if a handset is plugged in to any of them, it sounds like an echo ( an open line ?? ). I've located the main 'star' junction and hopefully a picture of this will appear below :-

20140929_191034 by markoneswift, on Flickr

From the image, you can see towards the bottom left a blue wire which appears to have been punched down at some point. Would it be a safe assumption that if I follow sequentially along the numbered slots and then punch down this wire into the next available slot, the phone 'circuit' should be complete ? The order seems to go along blue / white+blue stripe, blue, white+blue stripe etc.

Hoping someone can help, thanks in anticipation :-)

Create new topic

This is a filtered page: currently showing replies marked as answers. Click here to see full discussion.

InstallerUFB
840 posts

Ultimate Geek


  #1145414 2-Oct-2014 10:20
Send private message

markoneswift:
Bung: Only 4 jacks? There appear to be 8 pairs leading out of the strip, #8 with a wire off and 1 pair at top right commoned down the strip.


Would it be fair to assume that the commoned pair could be the outside line ? How are these things usually wired ?


10pr krone blocks are not normaly used like this (but they can be) - Looking at the picture I would have to assume that the Blue/white pr that has been punched down first on tag set 1 would be the incomeing line.

I would guess that the cable feeding this strip and the one that is connected to the only working jkpt would both come from the ETP on the outside of the house -  ifyou ar confident that yu can indeitify the correct circuits and have the tools/materials to recrimp the connections you could swap them around your self  - if not bite the bullet and get your provider to get a service tech around to sort it out for you (they may even pay for it)

Create new topic





News and reviews »

Air New Zealand Starts AI adoption with OpenAI
Posted 24-Jul-2025 16:00


eero Pro 7 Review
Posted 23-Jul-2025 12:07


BeeStation Plus Review
Posted 21-Jul-2025 14:21


eero Unveils New Wi-Fi 7 Products in New Zealand
Posted 21-Jul-2025 00:01


WiZ Introduces HDMI Sync Box and other Light Devices
Posted 20-Jul-2025 17:32


RedShield Enhances DDoS and Bot Attack Protection
Posted 20-Jul-2025 17:26


Seagate Ships 30TB Drives
Posted 17-Jul-2025 11:24


Oclean AirPump A10 Water Flosser Review
Posted 13-Jul-2025 11:05


Samsung Galaxy Z Fold7: Raising the Bar for Smartphones
Posted 10-Jul-2025 02:01


Samsung Galaxy Z Flip7 Brings New Edge-To-Edge FlexWindow
Posted 10-Jul-2025 02:01


Epson Launches New AM-C550Z WorkForce Enterprise printer
Posted 9-Jul-2025 18:22


Samsung Releases Smart Monitor M9
Posted 9-Jul-2025 17:46


Nearly Half of Older Kiwis Still Write their Passwords on Paper
Posted 9-Jul-2025 08:42


D-Link 4G+ Cat6 Wi-Fi 6 DWR-933M Mobile Hotspot Review
Posted 1-Jul-2025 11:34


Oppo A5 Series Launches With New Levels of Durability
Posted 30-Jun-2025 10:15



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.