Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


Loismustdye

927 posts

Ultimate Geek

Trusted

#306764 19-Aug-2023 18:13
Send private message

Wife’s swift needs the gas stays replaced on the rear hatch, only issue is repco etc dont have the stay that is being used in the car.
Question is, can I replace with similar gas stays? Ie a slightly differnet length and therefore with a higher Newton?
Officially through suzuki its over $300 with a 5 minute fitting (its an easy job for me to do), and as I’m a bit of a stinge would rather do myself.
Thanks

View this topic in a long page with up to 500 replies per page Create new topic
 1 | 2
RunningMan
8953 posts

Uber Geek


  #3118015 19-Aug-2023 18:31
Send private message

Tried Supercheap?

 

There's also several sellers out of Australia like these guys https://www.gasstrutaustralia.com.au/ 




hsvhel
1237 posts

Uber Geek

ID Verified

  #3118018 19-Aug-2023 19:12
Send private message

I use these guys

 

https://gasstrutservices.co.nz/

 

They can advise on a complete replacement or re-build yours to fit the same but be bullet proof

 

Have had them do our AKL based utes and the boys have sent their outer region sets when failing for change.





Referral Link Quic

 

Free Setup use R502152EQH6OK on check out

 

 


Scott3
3963 posts

Uber Geek

Lifetime subscriber

  #3118030 19-Aug-2023 21:41
Send private message

Last time I had saggy struts (it was on a 2006 corolla), I just ordered new aftermarket ones from trademe.

Not as environmentally friendly as re-gassing, but getting new ones is cheap, and it is convenient having them delivered to your door.

Once I worked out what was going on, fitment was super easy (but took me a while to work out I needed to pull out the metal strap to remove the old ones).


Example listing from a 10 second search. No ideal the year of OP's swift:

https://www.trademe.co.nz/a/motors/car-parts-accessories/suzuki/listing/4282071370

(note this seller has a lot of bad feedback from slow delivery times.) 




Goosey
2829 posts

Uber Geek

Subscriber

  #3118038 19-Aug-2023 23:11
Send private message

Good info on how to measure etc on the home page of these guys... (chch based)

 

 

 

https://www.strutpower.co.nz/

 

 

 

Just try to find someone to re gas and you are done... 


Loismustdye

927 posts

Ultimate Geek

Trusted

  #3118048 20-Aug-2023 07:26
Send private message

Thanks for the replies
Super cheap wasnt much help either as they didnt have a similar sized one. Trademe wasnt much help as they are all for older models.
As this is the second set that has stopped working on the car in 5 years I’m kinda reluctant to get them from the suzuki outfit as the product they have is clearly not up to scratch/strong enoughz for the job. It seems odd as we have an 8 year old santa fe with much heavier rear hatch etc and those haven’t failed once.
I will have a look at those options provided and see what they can do.
Cheers

Bung
6477 posts

Uber Geek

Subscriber

  #3118057 20-Aug-2023 09:15
Send private message

What model Swift is it? I had a quick look on Suzuki-forums 2004+ Swift forum with no obvious strut problem showing up. Member 2013GV is an NZ Suzuki dealer mechanic if you want to chase him for comment.

We had a 2008 SX4 for 10 years with no gas strut issues (a bit like an overweight Swift).

cb1

cb1
336 posts

Ultimate Geek


  #3118106 20-Aug-2023 09:42
Send private message

I purchased 2 from Motortech4x4 in Wairau valley, North Shore in Auckland for our Nissan. From memory around the $100 mark for both.

 

Longer length may mean it wouldn't be short enough to fit between mounting bolts when closed or the hatch is more vertical when fully open so harder to reach to pull down or hit garage door.





cb

 
 
 

Cloud spending continues to surge globally, but most organisations haven’t made the changes necessary to maximise the value and cost-efficiency benefits of their cloud investments. Download the whitepaper From Overspend to Advantage now.
Loismustdye

927 posts

Ultimate Geek

Trusted

  #3118110 20-Aug-2023 10:12
Send private message

Bung: What model Swift is it? I had a quick look on Suzuki-forums 2004+ Swift forum with no obvious strut problem showing up. Member 2013GV is an NZ Suzuki dealer mechanic if you want to chase him for comment.

We had a 2008 SX4 for 10 years with no gas strut issues (a bit like an overweight Swift).


Its a 2018, when they redesigned the swift.
One of my colleagues has the RS (wifes is the lower specc’d GL) the same shape and had no issues with hers either

  #3118187 20-Aug-2023 13:58
Send private message

Interestingly struts have recently failed on our little Suzuki Alto, although it is 10 years old.


Loismustdye

927 posts

Ultimate Geek

Trusted

  #3118313 20-Aug-2023 19:23
Send private message

@Scott3 that link for Ali looks promising, going to order a pair tomorrow after we hear back from suzuki (the wife’s going to check with them what their expectancy is, a 5 yr old car shouldn’t already need it’s 3rd set of struts), at that price we will prolly order a couple of sets in case it’s an issue with her car causing them to fail (although I’m not sure how). thanks

 

@allan my wife found a few alto stays on trademe, all at a reasonable price, compared to the $345 she was quoted with suzuki.

 

thanks for all the suggestions though from everyone, it appears there is a few options there if I wanted to get the existing ones regassed or flick an email through to someone to enquire.

 

 


Scott3
3963 posts

Uber Geek

Lifetime subscriber

  #3118326 20-Aug-2023 20:36
Send private message

Might also be worth a measure. There is a chance that Suzuki stuck with the 510mm length from the prior generation, which would make aftermarket options more plentiful.


Bung
6477 posts

Uber Geek

Subscriber

  #3118340 20-Aug-2023 23:02
Send private message

The struts could have carried over from previous models. Some searches on 2018 struts seem to give 2010 onward. It's a shame Suzuki pulled out of the US market in 2012 as some of their parts sites were very good at showing all vehicles that were compatible with common parts.

Goosey
2829 posts

Uber Geek

Subscriber

  #3118350 21-Aug-2023 06:36
Send private message

If buying from Ali express, just be aware it will probably need to come sea freight.

 

(I don’t think compressed air is allowed on air freight)?


Bung
6477 posts

Uber Geek

Subscriber

  #3118376 21-Aug-2023 08:26
Send private message

Just in case it's possible to fit the struts either way up were the 2nd pair fitted the same as the 1st?

 1 | 2
View this topic in a long page with up to 500 replies per page Create new topic





News and reviews »

Air New Zealand Starts AI adoption with OpenAI
Posted 24-Jul-2025 16:00


eero Pro 7 Review
Posted 23-Jul-2025 12:07


BeeStation Plus Review
Posted 21-Jul-2025 14:21


eero Unveils New Wi-Fi 7 Products in New Zealand
Posted 21-Jul-2025 00:01


WiZ Introduces HDMI Sync Box and other Light Devices
Posted 20-Jul-2025 17:32


RedShield Enhances DDoS and Bot Attack Protection
Posted 20-Jul-2025 17:26


Seagate Ships 30TB Drives
Posted 17-Jul-2025 11:24


Oclean AirPump A10 Water Flosser Review
Posted 13-Jul-2025 11:05


Samsung Galaxy Z Fold7: Raising the Bar for Smartphones
Posted 10-Jul-2025 02:01


Samsung Galaxy Z Flip7 Brings New Edge-To-Edge FlexWindow
Posted 10-Jul-2025 02:01


Epson Launches New AM-C550Z WorkForce Enterprise printer
Posted 9-Jul-2025 18:22


Samsung Releases Smart Monitor M9
Posted 9-Jul-2025 17:46


Nearly Half of Older Kiwis Still Write their Passwords on Paper
Posted 9-Jul-2025 08:42


D-Link 4G+ Cat6 Wi-Fi 6 DWR-933M Mobile Hotspot Review
Posted 1-Jul-2025 11:34


Oppo A5 Series Launches With New Levels of Durability
Posted 30-Jun-2025 10:15









Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.