Hi all,

I'm looking for a 40mm high, 120w+ PSU to fit my 1U case for an HTPC project. I have a working DELL 210W PSU kicking about which fits the bill but have heard DELL use/used a non-standard ATX format for their connectors and will likely damage my mobo (DG45FC).

I have compared the wire-out between the DELL and the working (though too-large) PSU and both 20-pin ATX jacks and the colours are identical. I mean, the colours are the same, but very slightly different shades for 3 or 4 wires.

I'd love to use this PSU if it was't for the warnings I read somewhere online at the w/e, so any input from folks would be v.helpful.

Cheers
Russ