ASUS ZenWifi BD4 on One.NZ Fibre

Forums › One New Zealand (including Vodafone, WxC, Farmside) › ASUS ZenWifi BD4 on One.NZ Fibre

eugeneykc

101 posts

Master Geek

ID Verified

#318919 4-Mar-2025 22:38

I'm having trouble setting up my ASUS ZenWiFi BD4 with ONE.NZ. I've followed the instructions and configured VLAN 10, but I'm getting a 'DHCP settings incorrect' message. My old routers are working, so I know the fiber connection is good. Has anyone else experienced this, and do you have any solutions? Thanks!

mrgsm021

1467 posts

Uber Geek

Trusted

#3350287 5-Mar-2025 08:59

One NZ fibre setting is DHCP/dynamic IP on WAN interface with vlan 10.

Can you share screenshot of the settings?

Samsung

Shop now on Samsung phones, tablets, TVs and more (affiliate link).

eugeneykc

101 posts

Master Geek

ID Verified

#3350577 5-Mar-2025 22:39

mrgsm021:

One NZ fibre setting is DHCP/dynamic IP on WAN interface with vlan 10.

Can you share screenshot of the settings?

Thanks @mrgsm012, I might have fixed it this afternoon by updating DHCP query frequency from Aggressive to Continuous. My change window ran out before my family came home, so I did not get enough time to complete the configurations of fixed IP assignments and additional SSIDs.

I have taken some screenshots while fiddling with the settings. If I can't get it to work tomorrow I will post my settings.

eugeneykc

101 posts

Master Geek

ID Verified

#3350896 7-Mar-2025 10:17

eugeneykc:

mrgsm021:

One NZ fibre setting is DHCP/dynamic IP on WAN interface with vlan 10.

Can you share screenshot of the settings?

Thanks @mrgsm012, I might have fixed it this afternoon by updating DHCP query frequency from Aggressive to Continuous. My change window ran out before my family came home, so I did not get enough time to complete the configurations of fixed IP assignments and additional SSIDs.

I have taken some screenshots while fiddling with the settings. If I can't get it to work tomorrow I will post my settings.

I can confirm changing DHCP query frequency from Aggressive to Continuous fixed my problem. A setting that's only available on the web UI.