Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


View this topic in a long page with up to 500 replies per page Create new topic
1 | 2 
cyril7
9075 posts

Uber Geek
+1 received by user: 2499

ID Verified
Trusted
Subscriber

  #2916025 19-May-2022 16:59
Send private message

Hi if you need/want a managed switch with vlans etc then the rb260 is good, but better value are the tplink TL-SG105E or TL- SG108E are great value, the key is the E on the end for easysmart that have essential managed features. And good value.

If you don't need those features then the same model range without the E on the end are good too.

Dlinks are not too bad either.

https://www.pbtech.co.nz/category/networking/switches?fs=21212135

Cyril



KiwiSurfer
1725 posts

Uber Geek
+1 received by user: 994

ID Verified
Lifetime subscriber

  #2916044 19-May-2022 18:52
Send private message

Having tried out a variety of WiFi solutions over the last few years, I have to say I don't rate the Microtik WiFi's capabilities very well. They are great as Ethernet routers/switches but I recommend looking elsewhere for WiFi.

 

Originally had a EdgeRouter + 3x Unifi APs combo which worked extremely well. Ditched all that so I could migrate to an all-in-one Microtik. That was fine for Ethernet LAN but found the WiFi was not very good. I eventually ended up buying a cheap and old Ruckus AP off Trade Me to test its capabilities. I found the Ruckus would consistently outperform the Microtik so moved to a Microtik Router/Switch + Ruckus WiFi AP combo. The Ruckus AP has since been replaced with a Netgear Orbi set up (with 2x APs to improve coverage) which has performed the best so far and is capably backed by the Microtik router.

 

One issue I ran into frequently with the Microtik WiFi is their lack of band steering. I did some research and found in their forums that Microtik's point of view is that band steering should be done on the device itself. Sounds fine in theory, however I had a lot of devices that would frequently switch to 2.4 GHz despite a perfectly good 5 GHz signal. No issues using e.g. Unifi or the Netgear Orbi which sees the vast majority of devices on 5 GHz I presume due to band steering.

 

Suggest OP use Microtik as the router as it's a very capable router. But look elsewhere for WiFi.


1 | 2 
View this topic in a long page with up to 500 replies per page Create new topic








Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.