The router guide - what to look for and what is best.

Forums › LAN (ethernet/Wifi/routers/Bluetooth) › The router guide - what to look for and what is best.

1 | ... | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34

887 posts

Ultimate Geek
+1 received by user: 460

ID Verified

Lifetime subscriber

#2903393 18-Apr-2022 09:35

michaelmurfy:

@fe31nz I no-longer recommend the Ubiquiti Edgerouter at all given Ubiquiti has abandoned it.

Would you put OpenWRT on an Edgerouter?

Tinkerisk

4798 posts

Uber Geek
+1 received by user: 3660

#2903502 18-Apr-2022 15:47

You have to expect performance drops since openWRT doesn‘t use the offloading hardware of the EdgeRouter.

- NET: FTTH & VDSL, OPNsense, 10G backbone, GWN APs
- SRV: 12 RU HA server cluster, 0.1 PB storage on premise
- IoT: thread, zigbee, tasmota, BidCoS, LoRa, WX suite, IR
- 3D: two 3D printers, 3D scanner, CNC router, laser cutter

fe31nz

1294 posts

Uber Geek
+1 received by user: 423

#2903585 18-Apr-2022 22:58

OpenWRT does use hardware offloading on lots of devices. For example, OpenWRT on my Linksys WRT1900ac uses a binary blob provided by someone (the chipset manufacturer or Linksys) and seems to have full access to the available offloading capabilities. So if such support is available for the Cavium chipset used the the ER4, then OpenWRT is likely to support offloading at some point, even if it does not already. I had a quick look at the ER4 OpenWRT page and it did not seem to say either way, but I am sure that if you read the associated OpenWRT forum pages someone there will know. I certainly would not recommend anyone using OpenWRT on a router where there was not offloading support, as the throughput would be dismal. OpenWRT is a pretty good system for a router if you do have offloading support.

evilonenz

/dev/urandom
291 posts

Ultimate Geek
+1 received by user: 152

ID Verified

Trusted

Lifetime subscriber

#2905047 21-Apr-2022 18:47

So, after years of rocking the ERLite, I am looking for a change due to lack of security updates and the fact Ubiquiti have seemly decided to ignore the EdgeMAX gear. Now this is where I get stuck..

I am tossing up between 3 options:
1) Replace it with a hAP AC3 / RB5009
2) Purpose built miniPC with pfSense or OPNsense (similar to one in video on last page)
3) OpenWRT onto the existing EdgeRouter

The cost conscious side of me is leaning towards option 3, however I would really rather option 1 or 2, but cannot figure out for the life of me which.

Connection is 2deg 900/400, not overly complex setup, however do have multiple VLANs, and S/DNAT rules.

Any input would be appreciated, it will certainly assist me in deciding.

Smokeping

Referral Links:

Quic - Use code R536299EPGOCN at checkout for free setup
Contact Energy - Use code FRTQDXB for $100 credit

michaelmurfy

meow
13580 posts

Uber Geek
+1 received by user: 10910

Moderator

ID Verified

Trusted

Lifetime subscriber

#2905048 21-Apr-2022 18:51

@evilonenz Mikrotik will be your best bet for Gigabit if you don't mind learning. I find it is more flexible than EdgeOS.

I'm actually considering building a PFSense box but there is the problem with single-threaded PPPoE on FreeBSD firewalls that can slow performance plus increased power use compared to a dedicated router with full packet offloading.

OpenWRT - I've tried this, you won't get Gigabit performance I'm afraid.

Michael Murphy | https://murfy.nz
Referral Links: Quic Broadband (use R122101E7CV7Q for free setup)

Are you happy with what you get from Geekzone? Please consider supporting us by subscribing.
Opinions are my own and not the views of my employer.

Jiriteach

1139 posts

Uber Geek
+1 received by user: 373

ID Verified

Trusted

Lifetime subscriber

#2905056 21-Apr-2022 19:07

Following the discussion - what’s the Mikrotik equivalent of the UDM Pro? As a router that is.

-- opinions expressed by me are solely my own. ie - personal

Samsung

Shop now on Samsung phones, tablets, TVs and more (affiliate link).

Spyware

3818 posts

Uber Geek
+1 received by user: 1366

Lifetime subscriber

#2905057 21-Apr-2022 19:11

https://mikrotik.com/product/ccr2004_16g_2splus

Spark Max Fibre using Mikrotik CCR1009-8G-1S-1S+, CRS125-24G-1S, Unifi UAP, U6-Pro, UAP-AC-M-Pro, Apple TV 4K (2022), Apple TV 4K (2017), iPad Air 1st gen, iPad Air 4th gen, iPhone 13, SkyNZ3151 (the white box). If it doesn't move then it's data cabled.

Earbanean

1110 posts

Uber Geek
+1 received by user: 377

#2905435 22-Apr-2022 16:18

On the RB5009, it appears that the 2.5G ethernet port is also the POE in port. Does that mean if you connected a POE switch to that port, then it would act as the data link to the switch and also power the router?

fritzman

391 posts

Ultimate Geek
+1 received by user: 23

ID Verified

#2905446 22-Apr-2022 16:32

Here’s a question for those who’ve been playing with mesh wifi a lot more and more recently than me.

Background… about 7 years ago, I set up wifi at a missionary organization in the Philippines. I used OpenMesh gear as I was quite familiar with it and had some on hand. One of the key features, is that I can entirely manage it from NZ.

It’s now pretty old tech and one of the units has died, so I’m considering what to replace the setup with. It’s a large 2-storey concrete building with solid internal walls and has cabling to two good locations downstairs and one upstairs, which acts as a wireless link to two others upstairs.

Can’t be too exy but hoping there’s something 802.11ax space that offers mesh and if easy to manage from here. Router is supplied by the ISP btw.

Thanks.

Sons Rig: Asus TUF Gaming X-570, Ryzen 9 3900X, G.Skill neo 2x16Gb 3600's, Sabrent Rocket 1Tb M.2, Win10 Pro, Phanteks case, EVGA G5 850W.

NAS: DS1819+ - 52Tb in Raid6

My rig: HP Elitebook X360 Lappy with a 2Tb SN850.. woohoo.. I've retired!

Heat under fritzman (152-0-0)

elpenguino

3577 posts

Uber Geek
+1 received by user: 2939

#2905447 22-Apr-2022 16:33

I am always excited when I see the title of this thread in GZ Live and then disappointed when I remember it is about networking and not woodworking tools.

Most of the posters in this thread are just like chimpanzees on MDMA, full of feelings of bonhomie, joy, and optimism. Fred99 8/4/21

eonsim

403 posts

Ultimate Geek
+1 received by user: 192

Trusted

#2905454 22-Apr-2022 16:48

fritzman: Here’s a question for those who’ve been playing with mesh wifi a lot more and more recently than me.

Background… about 7 years ago, I set up wifi at a missionary organization in the Philippines. I used OpenMesh gear as I was quite familiar with it and had some on hand. One of the key features, is that I can entirely manage it from NZ.

...

Can’t be too exy but hoping there’s something 802.11ax space that offers mesh and if easy to manage from here. Router is supplied by the ISP btw.

Thanks.

Maybe some of the TP-link Omada gear? You would need a couple of AP's and a hardware controller (unless the place has a server that runs 24/7 and can run the software controller). They offer a cloud interface to the hardware/software controller and give full control over the network. Could also add a few Omada switches or an omada router if you want full control of the network.

Geekzone

Want to support Geekzone and browse the site without the ads? Subscribe to Geekzone now (monthly, annual and lifetime options).

michaelmurfy

meow
13580 posts

Uber Geek
+1 received by user: 10910

Moderator

ID Verified

Trusted

Lifetime subscriber

#2905554 23-Apr-2022 00:42

@fritzman I've got the Grandstream GWN7664. Has free web management (GWN Cloud) and the product is actually pretty good for the price.

Have a look at the GWN7660 - https://www.gowifi.co.nz/grandstreamnetworks/gwn7660.html

To provision it to the cloud portal all you need to do is get the serial number + mac addresses off the access points (get whoever is overseas to send this to you) then plug them into standard PoE. From there you can configure, software update etc remotely from NZ.

Kiwifruta

1425 posts

Uber Geek
+1 received by user: 337

ID Verified

#2905556 23-Apr-2022 02:30

evilonenz: So, after years of rocking the ERLite, I am looking for a change due to lack of security updates and the fact Ubiquiti have seemly decided to ignore the EdgeMAX gear. Now this is where I get stuck..

I am tossing up between 3 options:
1) Replace it with a hAP AC3 / RB5009
2) Purpose built miniPC with pfSense or OPNsense (similar to one in video on last page)
3) OpenWRT onto the existing EdgeRouter

The cost conscious side of me is leaning towards option 3, however I would really rather option 1 or 2, but cannot figure out for the life of me which.

Connection is 2deg 900/400, not overly complex setup, however do have multiple VLANs, and S/DNAT rules.

Any input would be appreciated, it will certainly assist me in deciding.

regarding 2) Have you considered VyOS? (Debian?) Linux based will do all the VLANs and NAT rules you want. You can get it for free by contributing to the documentation or compiling it yourself.

Tinkerisk

4798 posts

Uber Geek
+1 received by user: 3660

#2905558 23-Apr-2022 05:58

Some people just need a little longer to get off their horse :-))

fritzman

391 posts

Ultimate Geek
+1 received by user: 23

ID Verified

#2905588 23-Apr-2022 09:35

Kiwifruta:
evilonenz: So, after years of rocking the ERLite, I am looking for a change due to lack of security updates and the fact Ubiquiti have seemly decided to ignore the EdgeMAX gear. Now this is where I get stuck..

I am tossing up between 3 options:
1) Replace it with a hAP AC3 / RB5009
2) Purpose built miniPC with pfSense or OPNsense (similar to one in video on last page)
3) OpenWRT onto the existing EdgeRouter

The cost conscious side of me is leaning towards option 3, however I would really rather option 1 or 2, but cannot figure out for the life of me which.

Connection is 2deg 900/400, not overly complex setup, however do have multiple VLANs, and S/DNAT rules.

Any input would be appreciated, it will certainly assist me in deciding.

regarding 2) Have you considered VyOS? (Debian?) Linux based will do all the VLANs and NAT rules you want. You can get it for free by contributing to the documentation or compiling it yourself.

Looks like a great solution at a great price.
Thanks.

Sons Rig: Asus TUF Gaming X-570, Ryzen 9 3900X, G.Skill neo 2x16Gb 3600's, Sabrent Rocket 1Tb M.2, Win10 Pro, Phanteks case, EVGA G5 850W.

NAS: DS1819+ - 52Tb in Raid6

My rig: HP Elitebook X360 Lappy with a 2Tb SN850.. woohoo.. I've retired!

Heat under fritzman (152-0-0)

1 | ... | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34