Almost towards the install now ...

Forums › LAN (ethernet/Wifi/routers/Bluetooth) › Almost towards the install now ...

rayonline

1531 posts

Uber Geek
+1 received by user: 39

Topic # 119731 11-Jun-2013 16:26

So I am probably going to use this Cat6 jack:

http://www.computerstore.co.nz/FP-C6-007.aspx

What sort of punch tool do I need? It's just a one job then maybe some yrs after I may add a few other ports if we ever move away from RJ11, kinda difficult to install jacks to other areas without tearing down walls.

With the face plates - what is the difference between one piece ones and two piece ones?

cyril7

6306 posts

Uber Geek
+1 received by user: 288

Trusted

Subscriber

Reply # 834314 11-Jun-2013 16:50

Hi, a 110 works best with those jacks, not too sure what you mean by one piece and two piece faceplates, do you mean one or two mech (or upto 6) then that refers to the number of keystones you can put on each faceplate.

http://www.computerstore.co.nz/CT-PDT110BG.aspx

Cyril

rayonline

1531 posts

Uber Geek
+1 received by user: 39

Reply # 834327 11-Jun-2013 16:59

Thanks for that :))

One piece faceplate:
Link

Two piece faceplate:
Link

Or is the once piece just a cover and need something else? The two piece also doesn't say 110 style or what format it is ....

cyril7

6306 posts

Uber Geek
+1 received by user: 288

Trusted

Subscriber

Reply # 834361 11-Jun-2013 18:06

Hi, no in this instance one piece means it takes one keystone jack.

Cyril

rayonline

1531 posts

Uber Geek
+1 received by user: 39

Reply # 834391 11-Jun-2013 19:00

The second link didn't work.
http://www.computerstore.co.nz/FP-1KS.aspx

Yep - I overlooked it, the one port one says 110 style jack. Compare to the link just above here, is the difference only that this one has a extra cover that you pop on separately?

cyril7

6306 posts

Uber Geek
+1 received by user: 288

Trusted

Subscriber

Reply # 834406 11-Jun-2013 19:14

One person supports this post

Ok, I understand now. Look, in NZ to use these faceplates is not normal, we use either PDL or Clipsal, I recommend you match your current power and light switch hardware.

Cheers
Cyril

chevrolux

3561 posts

Uber Geek
+1 received by user: 1307

Subscriber

Reply # 834465 11-Jun-2013 20:58

One person supports this post

cyril7: Ok, I understand now. Look, in NZ to use these faceplates is not normal, we use either PDL or Clipsal, I recommend you match your current power and light switch hardware.

Cheers
Cyril

Plus one million!!

Those Dynamix/Chinese faceplates look horrible next to a nice PDL faceplate.

Also a lot easier to mix and match with PDL. Handy for behind the TV where there might be RJ45, coaxial, HDMI etc.