One computer accessing things one two networks?

Forums › LAN (ethernet/Wifi/routers/Bluetooth) › One computer accessing things one two networks?

funnyfela

282 posts

Ultimate Geek
+1 received by user: 27

Topic # 195084 5-Apr-2016 23:10

This one is a little out of my league.

I have just setup a ispy server at work to run a few different grid camera screens around the building. I have 13 cameras linked back to the cctv dvr channel streams. The DVR is on a separate network (for not business critical gear, laptops, phones) (Network A). I also would ideally like to have two IP cameras in the system that are on the work/business network (Network B).

The computer is on network A currently. I get a feeling that its not as simple as getting a second NIC and plugging in network B?

Edit: Bugga I just realised this would probably be better in LAN topic since its not unique to the cameras. Oh well

If you have to run heating in winter, you don’t own enough computers.

ubergeeknz

3344 posts

Uber Geek
+1 received by user: 1089

Trusted

Vocus

Reply # 1526589 5-Apr-2016 23:16

3 people support this post

It is about that simple, just use a different IP address range (or subnet) on each network, and don't specify any "default gateway" on the 2nd network.

The IP stack on the PC will figure out that IP addresses on network 2 belong to the same subnet as the adapter on network 2, and route that traffic appropriately.

michaelmurfy

Mr Snotty
8071 posts

Uber Geek
+1 received by user: 4049

Moderator

Trusted

Lifetime subscriber

Reply # 1526615 5-Apr-2016 23:49

One person supports this post

Correct. My home network (which I admit is overkill) has different networks for different things. I run VLAN's however in your case it is as simple as popping another Ethernet card in and you're away (just do what ubergeeknz said). It really sounds like you could use some VLAN plumbing though ;)

Michael Murphy | https://murfy.nz
A quick guide to picking the right ISP | The Router Guide | Community UniFi Cloud Controller | Ubiquiti Edgerouter Tutorial

Lias

3500 posts

Uber Geek
+1 received by user: 1965

Trusted

Lifetime subscriber

Reply # 1526616 5-Apr-2016 23:50

One person supports this post

FWIW It's an utterly terrible idea from a security perspective to do that.

The "proper" but expensive way would be to put in a decent router or more likely an L3 switch, and configure appropriate ACL's such that only the camera traffic can traverse the link.

Information wants to be free. The Net interprets censorship as damage and routes around it.

Lias

3500 posts

Uber Geek
+1 received by user: 1965

Trusted

Lifetime subscriber

Reply # 1526617 5-Apr-2016 23:53

One person supports this post

michaelmurfy:

It really sounds like you could use some VLAN plumbing though ;)

This.

Layer 3 Cisco switch, multiple VLANs, some ACLs.. Bob's your aunty..

Information wants to be free. The Net interprets censorship as damage and routes around it.

michaelmurfy

Mr Snotty
8071 posts

Uber Geek
+1 received by user: 4049

Moderator

Trusted

Lifetime subscriber

Reply # 1526620 6-Apr-2016 00:10

Lias:

michaelmurfy:

It really sounds like you could use some VLAN plumbing though ;)

This.

Layer 3 Cisco switch, multiple VLANs, some ACLs.. Bob's your aunty..

I've got that sort of setup on my network however it is not everyone's cuppa tea :) - Cisco is pricey though, the Ubiquiti Switches can do it too and are far cheaper!

Michael Murphy | https://murfy.nz
A quick guide to picking the right ISP | The Router Guide | Community UniFi Cloud Controller | Ubiquiti Edgerouter Tutorial

funnyfela

282 posts

Ultimate Geek
+1 received by user: 27

Reply # 1527222 6-Apr-2016 18:43

ubergeeknz:

It is about that simple, just use a different IP address range (or subnet) on each network, and don't specify any "default gateway" on the 2nd network.

The IP stack on the PC will figure out that IP addresses on network 2 belong to the same subnet as the adapter on network 2, and route that traffic appropriately.

Oh okay lol

I'm sure I could use some nice cisco gear etc but with no budget (utilising an old pc with quad graphics card already) that makes its a bit harder, so second NIC we go :)

Cheers guys :D

If you have to run heating in winter, you don’t own enough computers.

tdgeek

13786 posts

Uber Geek
+1 received by user: 2501

Trusted

Reply # 1527266 6-Apr-2016 19:44

What is a one two Networks? on two Networks???

It's the subject title, can we have a bit of spelling here please? I see that a bit here.

Grumble over

funnyfela

282 posts

Ultimate Geek
+1 received by user: 27

Reply # 1527280 6-Apr-2016 19:57

tdgeek:

What is a one two Networks? on two Networks???

It's the subject title, can we have a bit of spelling here please? I see that a bit here.

Grumble over

Um just a typo? Not like I can go back and edit it.

First world problems right.

If you have to run heating in winter, you don’t own enough computers.