Settings request please 7590

Forums › 2degrees (including Slingshot, Orcon, Flip, Stuff Fibre, MyRepublic, 2talk and Vocus) › Settings request please 7590

xpd

Geek @ Coastguard NZ
13765 posts

Uber Geek

Retired Mod

ID Verified

Trusted

Lifetime subscriber

#306309 12-Jul-2023 10:00

Can someone on 2D with a Fritz 7590 show me their settings please under Home Network / Network / Network Settings / Ip Addresses / IPv4 Settings please ?

As per my thread in the Neon/Streaming forum, I've somehow broken any streaming video (inc Zoom).....

Thanks :)

Gavin / xpd / FastRaccoon / Geek of Coastguard New Zealand

LinkTree

Delorean

653 posts

Ultimate Geek

ID Verified

Trusted

Lifetime subscriber

#3103066 12-Jul-2023 10:23

Since you have now been switched to the new 2D network, the older SNAP settings that are baked into the FritzBox firmware might be causing some issues?

I had a FritzBox from Snap years ago and I downloaded the "generic" firmware from AVM and when I shifted providers the FritzBox stopped getting the message "received updates from ISP" or something along those lines.

As my understanding 2D are moving to Netgear and phasing out the FritzBox so I guess these settings will become unsupported soon.

A fresh reload might sort it out here is the download link

Referral Link: | Quic Broadband (use R142206E0L2CR for free setup)

outdoorsnz

674 posts

Ultimate Geek

#3103071 12-Jul-2023 10:37

I have fritz 7490, so might not be quite the same, but what about dns settings under Internet - Account information - DNS Server: DNSv4 Servers?

xpd

Geek @ Coastguard NZ
13765 posts

Uber Geek

Retired Mod

ID Verified

Trusted

Lifetime subscriber

#3103075 12-Jul-2023 11:03

Current settings..... if I change the DNS, still no go. :-/ But with all these migrations going on, I'm confused as to which DNS I should be on now :D The internet info page shows the DNS being picked up is Slingshot.

Gavin / xpd / FastRaccoon / Geek of Coastguard New Zealand

LinkTree

outdoorsnz

674 posts

Ultimate Geek

#3103088 12-Jul-2023 11:18

xpd:

Current settings..... if I change the DNS, still no go. :-/ But with all these migrations going on, I'm confused as to which DNS I should be on now :D The internet info page shows the DNS being picked up is Slingshot.

I use piHole and have local IP address set in both places - Local DNS server (network settings as above) and also in Internet Account page - DNS Server - DNS4Server address.

Here is a good help page describing this. So you have DNS server for web requests and local DNS server.

https://en.avm.de/service/knowledge-base/dok/FRITZ-Box-7590/165_Configuring-different-DNS-servers-in-the-FRITZ-Box/

Have you tried resetting your fritz?

xpd

Geek @ Coastguard NZ
13765 posts

Uber Geek

Retired Mod

ID Verified

Trusted

Lifetime subscriber

#3103107 12-Jul-2023 11:41

Have reset DNS again, and now streaming appears to be working on mobile devices again, but TV is still no go.... :-/

Restarted the router multiple times.

DNS under Internet Account is set to default ISP provided.

Gavin / xpd / FastRaccoon / Geek of Coastguard New Zealand

LinkTree

outdoorsnz

674 posts

Ultimate Geek

#3103119 12-Jul-2023 11:50

xpd:

Have reset DNS again, and now streaming appears to be working on mobile devices again, but TV is still no go.... :-/

Restarted the router multiple times.

DNS under Internet Account is set to default ISP provided.

Have you checked TV network settings are not set to static? But if DHCP, then you could try static and use 8.8.8.8 as DNS to bypass router / ISP dns settings just incase.

outdoorsnz

674 posts

Ultimate Geek

#3103120 12-Jul-2023 11:51

Also power down TV etc for sanity check :-)

Equinox IT

Cloud spending continues to surge globally, but most organisations haven’t made the changes necessary to maximise the value and cost-efficiency benefits of their cloud investments. Download the whitepaper From Overspend to Advantage now.