![]() ![]() ![]() ![]() |
|
coffeebaron: And settings?
Michael Murphy | https://murfy.nz
Referral Links: Quic Broadband (use R122101E7CV7Q for free setup)
Are you happy with what you get from Geekzone? Please consider supporting us by subscribing.
Opinions are my own and not the views of my employer.
quickymart: Fairly unlikely.
beenz:quickymart: Fairly unlikely.
Interesting so the claims of a 10% speed increase that I read in one of the discussions, not sure were now are not really justified or proven ?
#include <std_disclaimer>
Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.
RunningMan: That improvement is the sync rate between your modem and the exchange or cabinet. In general terms, this is the weakest link for most people, so addressing this gives an improvement.
In your case however, it isn't the limiting factor, so it you aren't likely to see a lot of benefit.
beenz: Just found this
So how much faster will my broadband be with a master filter? That’s a tough question to answer, because the results are going to depend entirely on the condition of your existing wiring. It’s very rare for a master filter to not increase broadband speeds by a minimum of 5 to 10%. It’s entirely realistic in circumstances where wiring is very poor to see speed double, or even triple. While certainly not the norm, I’ve installed master filters that have resulted in speeds going from under 5Mbps to in excess of 15Mbps. Based upon the vast number of threads on Geekzone where internal wiring is discussed and on statistics gathered from a recent project undertaken by a major ISP looking at the internal wiring issue, it’s safe to pick a modest median speed increase in the vicinity of 20% to 50%.
http://www.geekzone.co.nz/sbiddle/8357
Sideface
beenz: This is a new modem.
VF sent it me.
Do the settings look ok.
|
![]() ![]() ![]() ![]() |