Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


hamistheman

82 posts

Master Geek


#9353 10-Sep-2006 23:35
Send private message

Ok, heres the problem.

I have about 5 users who i want to be able to be able to access two wireless networks, one at the office, and one at home.

all of the networks currently have 10.x.x.x, although I can get the home networks changed to 192.168.x.x if it helps.

The problem is, for security reasons, i want to cut DHCP out of the equation.

So all I want to do, is have two static Ip's stored, and when the relevant Wireless Access point is detected, it automatically changes the IP address to the relevant network.

I can't find anything at all on how to do this !!!!!!!!!!!!!


Any ideas?

Anyone have a similar problem?

Cheers





Create new topic
freitasm
BDFL - Memuneh
79288 posts

Uber Geek

Administrator
ID Verified
Trusted
Geekzone
Lifetime subscriber

#45792 11-Sep-2006 08:07
Send private message

There are a few products in the market to do this. You have to search for "Network Profile Manager" or similar terms.

Other than using a third party software you will have to use the same IP everywhere (which is not easy if people want to access other networks, while travelling for example) or accept that DHCP is not that bad and exists for a reason.





Please support Geekzone by subscribing, or using one of our referral links: Quic Broadband (free setup code: R587125ERQ6VE) | Samsung | AliExpress | Wise | Sharesies | Hatch | GoodSync 




jpwise
590 posts

Ultimate Geek

Lifetime subscriber

  #45801 11-Sep-2006 10:18
Send private message

As Mauricio said, DHCP is there for a reason. It does make life alot simpler when moving between multiple locations.

The other options (if the access point supports it) is to mac lock, and manually assign ip's based on mac address. If it supports manually assigning then you can essentially have an ip that's always the same (static) but is assigned via DHCP when you connect.

It's a feature I use a bit with dhcpd on linux, but off the top of my head I dont' know if any of the access points have a similar options.

Alternatively yes a network profile switcher would do the job for a static static ip. The Toshiba laptops (with built in wifi) normally ship with a program called ConfigFree which has that type of functionality.

Jp.




Working for Service Plus - www.serviceplus.co.nz

Authorised Service Agent for Apple, BenQ, Sony, and Toshiba - warranty & non-warranty repairs.


hamistheman

82 posts

Master Geek


  #45804 11-Sep-2006 10:35
Send private message

The problem is, the office network doesn't have DHCP, hence my wanting to cut it out. The reason for this is that we limit people that connect wirelessly to a very small subnet, and there is no DHCP controller for that subnet

Also, not all of the home networks have DHCP (so i'm told, but i don't actually belive this :) ).

I'll look into those tools you mentioned

CHeers,




freitasm
BDFL - Memuneh
79288 posts

Uber Geek

Administrator
ID Verified
Trusted
Geekzone
Lifetime subscriber

#45805 11-Sep-2006 10:39
Send private message

You will find that all home networks have DHCP. Very few people disable this feature, otherwise people would have to fumble with configurations they don't understand.





Please support Geekzone by subscribing, or using one of our referral links: Quic Broadband (free setup code: R587125ERQ6VE) | Samsung | AliExpress | Wise | Sharesies | Hatch | GoodSync 


jpwise
590 posts

Ultimate Geek

Lifetime subscriber

  #45806 11-Sep-2006 10:52
Send private message

I'm a bit surprised at having no dhcp in an office environment aswell. It used to be semi-common not to have it for smaller networks but any properly set up network will normally have it for the pure plug & play type convenience it gives.

Another option to look into might be to add dhcp to your office network. You can configure smaller subnet ranges in the dhcp configuration and also depending on what dhcp server you use configure it with mac restrictions.

Given the choice I'd go with adding a dhcp server to the office. It makes life alot simpler for future usage. It also means you can still have dhcp enabled for wherever you may happen to plug the laptop in (home, work, friends place, etc).

Jp.




Working for Service Plus - www.serviceplus.co.nz

Authorised Service Agent for Apple, BenQ, Sony, and Toshiba - warranty & non-warranty repairs.


hamistheman

82 posts

Master Geek


  #45808 11-Sep-2006 10:59
Send private message

I'll have to look into that. The small network at the office i am talking about does have wired connections as well, so i'll look into whether i can set up DHCP with MAC address security, for wired devices.

Basically i'm already overbudget, so trying not to buy new hardware etc,

Cheers,



Create new topic





News and reviews »

Air New Zealand Starts AI adoption with OpenAI
Posted 24-Jul-2025 16:00


eero Pro 7 Review
Posted 23-Jul-2025 12:07


BeeStation Plus Review
Posted 21-Jul-2025 14:21


eero Unveils New Wi-Fi 7 Products in New Zealand
Posted 21-Jul-2025 00:01


WiZ Introduces HDMI Sync Box and other Light Devices
Posted 20-Jul-2025 17:32


RedShield Enhances DDoS and Bot Attack Protection
Posted 20-Jul-2025 17:26


Seagate Ships 30TB Drives
Posted 17-Jul-2025 11:24


Oclean AirPump A10 Water Flosser Review
Posted 13-Jul-2025 11:05


Samsung Galaxy Z Fold7: Raising the Bar for Smartphones
Posted 10-Jul-2025 02:01


Samsung Galaxy Z Flip7 Brings New Edge-To-Edge FlexWindow
Posted 10-Jul-2025 02:01


Epson Launches New AM-C550Z WorkForce Enterprise printer
Posted 9-Jul-2025 18:22


Samsung Releases Smart Monitor M9
Posted 9-Jul-2025 17:46


Nearly Half of Older Kiwis Still Write their Passwords on Paper
Posted 9-Jul-2025 08:42


D-Link 4G+ Cat6 Wi-Fi 6 DWR-933M Mobile Hotspot Review
Posted 1-Jul-2025 11:34


Oppo A5 Series Launches With New Levels of Durability
Posted 30-Jun-2025 10:15









Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.